Skip to content
CodoPlayer

IPTV Bandwidth and Data Calculator

Work out how much internet speed IPTV needs for the number of screens you run, how many gigabytes it uses per hour, day and month, and how much disk space a recording takes. It is plain arithmetic in your browser and sends nothing to us.

How these figures are worked out

Data in gigabytes (GB) is the bitrate in megabits per second times 3600 seconds, divided by 8 bits per byte and by 1000. One GB here is 1000 megabytes, as internet plans and disk makers count it. Add a margin of about 25 per cent of speed on top of the figure for a steady picture, because a stream is not perfectly even.

The presets are typical round figures for picture and sound together. A real channel can use less or more, so type your own figure if you know it. Nothing here is a measurement of any provider, and a download or recording takes the same space as watching it.

Typical figures for one stream

Typical bitrate and data per hour for one stream
Picture qualityMbit/sGB per hourGB for 10 hours
Standard definition (480p, H.264)1.50.686.8
HD 720p (H.264)31.3513.5
Full HD 1080p (H.264)62.7027.0
Full HD 1080p (HEVC)3.51.5815.8
4K (HEVC)156.7567.5

The calculation runs in your browser. Nothing you type is sent to us.

How it works

  1. 1Pick a picture quality or type your own bitrate.
  2. 2Enter how many streams run at once, hours per day and hours to record.
  3. 3Press Calculate to read the speed, the data per day and month, and the recording space.

What the results mean

The table shows the speed all your streams need together, the gigabytes one stream and all streams use per hour, day and month, and the disk space a recording of the length you chose takes. The margin line adds a quarter on top of the speed, because a stream is not perfectly even.

Common problems

Buffering with enough speed on paper usually means the provider or the Wi-Fi is the bottleneck, not the plan: measure the provider with the Stream Tester. A monthly data cap is reached sooner with several screens, because every screen counts separately.

Step-by-step guide: IPTV buffering: provider, network or device?.

Example input

Two streams at an example bitrate, with viewing and recording hours.

Bitrate: 6 Mbit/s
Streams at the same time: 2
Hours watched per day: 4
Days per month: 30
Hours of recording: 10

You get: Estimated speed, data use and disk space for these settings.

Example result

Speed: 12.0 Mbit/s (about 15.0 Mbit/s with a 25 per cent margin)
Per hour, one stream: 2.70 GB
Per hour, both streams: 5.40 GB
Per day: 21.60 GB
Per month: 648.0 GB (0.65 TB)
Recording: 27.0 GB for 10.0 hours

Messages this tool can show

Messages reported by the IPTV Bandwidth Calculator
MessageWhat it meansWhat to do
Type a bitrate between 0.1 and 200 Mbit/s.The bitrate field was empty or outside the range.Pick a preset or type a figure in Mbit/s.
Streams at the same time must be between 1 and 50.The number of streams was empty or outside the range.Type a whole number from 1 to 50.
Hours per day must be between 0 and 24.The hours watched per day were outside the range.Type a number from 0 to 24.

Questions about the IPTV Bandwidth Calculator

How many Mbit/s do I need for IPTV?

Add up the bitrate of every stream you run at once, then add about a quarter on top for a steady picture. A single 1080p H.264 channel at about 6 Mbit/s needs roughly 7.5 Mbit/s. The figure depends on the channel, so type your own bitrate when you know it.

How many GB does an hour of IPTV use?

Gigabytes per hour are the bitrate times 3600 seconds, divided by 8 and by 1000. At 6 Mbit/s that is 2.7 GB per hour for one stream. Two screens at once double it. The calculator shows the figure for one stream and for all streams together.

Are the preset bitrates measured from a provider?

No. They are typical round figures for picture and sound together, offered as a starting point. A real channel can use less or more, depending on how it is encoded. Type your own figure for an exact answer, or read the speed in the Stream Tester.

Does this calculator send what I type to your server?

No. The sums run in your browser and the numbers stay on this page. Nothing is uploaded, stored or counted by the tool. The page itself is loaded from our server like any other page, and the site menu works as it does elsewhere.